The angles were carefully marked to follow the center line. Randy butted the straight edge up to the point of the previous angle, and marked the strip to be cut following the angle of the previous joint.
The strips were roughly cut to the angle with the flush cutting saw.
A sharp chisel was used to make the angle perfect. The piece was fit and cut, sometimes with several passes of the chisel, until it fit exactly.
We are getting down to the last strips. Randy's buddy Paul has been a great help.
Paul is wondering how in the world we are going to get the last piece in.
The strips were roughly cut to the angle with the flush cutting saw.
A sharp chisel was used to make the angle perfect. The piece was fit and cut, sometimes with several passes of the chisel, until it fit exactly.
We are getting down to the last strips. Randy's buddy Paul has been a great help. 
Paul is wondering how in the world we are going to get the last piece in.
No comments:
Post a Comment